keward plastic parts

Understanding Dispensing Valves and the Advantages of PEEK Material

What is a Dispensing Valve? Dispensing valves are crucial components used in various industries to precisely control the flow of liquids, gases, or other substances. These valves are responsible for accurately dispensing a specific amount of material, ensuring uniformity and consistency in production processes. The applications of dispensing valves are diverse, ranging from pharmaceuticals, food...

PPS and PEEK Plastic CMP Ring

CMP or chemical mechanical planarization is a polishing process used in the manufacturing of semiconductors. It is usually used to finish a silicon wafer after it has been etched and patterned into individual chips. The CMP process can also be used to remove excess photoresists from the surface of an object made using photolithography. The...

POM, PEEK Screw Motor Nut

Screw motor nuts are one of the essential parts of the motor. It is attached to the shaft of the motor and has a threaded hole with an internal thread that engages with the external thread on the shaft. The motor nut is a high-load, weak vibration, high-temperature resistant product. The screw on the outer...

POM Hose Pumps Rollers in Peristaltic Pump

The most important advantage of the peristaltic pump is that the pump tube can be used as a pump chamber. The fluid flows only through the pump tube without contaminating the pump body, at the same time the pump tube does not contaminate the fluid.  When needed to clean, you just need to replace the pump line. This...

PEEK, PTFE Plastic Flange

A flange is a device used in the process of connection, sealing, and support of mechanical parts. It is a kind of important and indispensable part of engineering machinery production. The material of the general connection parts is carbon steel and stainless steel. But nowadays, the plastic flange is widely used in municipal engineering, chemical...

PEEK, POM, and Nylon Plastic Gear

When you are looking for nonmetal gears, there are a few different options, such as PEEK, POM, and Nylon Plastic. The main question to ask yourself when deciding which material is right for you is what application you will be using them in. For example, PEEK is much stronger than Nylon but somewhat brittle under...

PEEK Vacuum Seamless Suction Cup

A vacuum seamless suction cup is a suctioning device that works by creating a partial vacuum on both sides of the suction cup. This vacuum causes the suction cup to stick to flat surfaces. Suction cups are available in different shapes, sizes, strengths, and materials. These properties dictate the use and benefits they offer. Vacuum...

PEEK GF30 Dispenser Screw

Dispenser screws are used to store and dispense glues, adhesives, sealants, and other materials. A wide range of dispenser screws is available for containers with capacities ranging from 30 milliliters to 20 liters. The most common form of the screw shaft is threaded, which has one or more helical ridges around the shaft. These ridges...

PEEK Digestion Tank

The digestion tank is a kind of digestion equipment that can be used for hydrolysis and acidification of the raw slurry, and the main function is to convert organic matter into soluble organic matter by hydrolysis so that the subsequent sludge dehydration process is easy to complete. Digestion tank is usually made from PEEK, PTFE...

PEEK CF30 Water Jet Loom Control Valve

The water jet looms control valve allows you to move forward or backward as you weave without having to stop and adjust your fabric yourself. This saves time and ensures that your fabric remains taut throughout each pass of the weaving machine. Why use PEEK CF30 instead of POM in the water jet loom control...

PEEK and PEEK CF30 Impeller

An impeller is a rotating component of a centrifugal pump, usually made of iron, steel, or other metal which transfers energy from the motor that drives the pump to the fluid being pumped by accelerating the fluid outwards from the center of rotation. Usually, the impeller is made of metal, but there are some disadvantages of...

Nylon Used in the Shaft Coupling

What is the shaft coupling? The shaft coupling is a mechanical coupling used to connect two shafts that are rotating at different speeds. The primary purpose of the shaft coupling is to absorb and transmit torque from one shaft to another. The shaft couplings are manufactured by various companies and each one has a unique...